public class SwitchMap extends Mapping
A SwitchMap can encapsulate any number of Mappings, but they must all have the same number of inputs (Nin attribute value) and the same number of outputs (Nout attribute value). The SwitchMap itself inherits these same values for its Nin and Nout attributes. Each of these Mappings represents a "route" through the switch, and are referred to as "route" Mappings below. Each route Mapping transforms positions between the input and output coordinate space of the entire SwitchMap, but only one Mapping will be used to transform any given position. The selection of the appropriate route Mapping to use with any given input position is made by another Mapping, called the "selector" Mapping. Each SwitchMap encapsulates two selector Mappings in addition to its route Mappings; one for use with the SwitchMap's forward transformation (called the "forward selector Mapping"), and one for use with the SwitchMap's inverse transformation (called the "inverse selector Mapping"). The forward selector Mapping must have the same number of inputs as the route Mappings, but should have only one output. Likewise, the inverse selector Mapping must have the same number of outputs as the route Mappings, but should have only one input.
When the SwitchMap is used to transform a position in the forward direction (from input to output), each supplied input position is first transformed by the forward transformation of the forward selector Mapping. This produces a single output value for each input position referred to as the selector value. The nearest integer to the selector value is found, and is used to index the array of route Mappings (the first supplied route Mapping has index 1, the second route Mapping has index 2, etc). If the nearest integer to the selector value is less than 1 or greater than the number of route Mappings, then the SwitchMap output position is set to a value of AST__BAD on every axis. Otherwise, the forward transformation of the selected route Mapping is used to transform the supplied input position to produce the SwitchMap output position.
When the SwitchMap is used to transform a position in the inverse direction (from "output" to "input"), each supplied "output" position is first transformed by the inverse transformation of the inverse selector Mapping. This produces a selector value for each "output" position. Again, the nearest integer to the selector value is found, and is used to index the array of route Mappings. If this selector index value is within the bounds of the array of route Mappings, then the inverse transformation of the selected route Mapping is used to transform the supplied "output" position to produce the SwitchMap "input" position. If the selector index value is outside the bounds of the array of route Mappings, then the SwitchMap "input" position is set to a value of AST__BAD on every axis.
In practice, appropriate selector Mappings should be chosen to associate a different route Mapping with each region of coordinate space. Note that the SelectorMap class of Mapping is particularly appropriate for this purpose.
If a compound Mapping contains a SwitchMap in series with its own inverse, the combination of the two adjacent SwitchMaps will be replaced by a UnitMap when the compound Mapping is simplified using astSimplify.
This program is distributed in the hope that it will be useful,but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public Licence for more details.
You should have received a copy of the GNU General Public Licence along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street,Fifth Floor, Boston, MA 02110-1301, USA
Mapping.Interpolator, Mapping.SpreaderLINEAR_INTERPOLATOR, LINEAR_SPREADER, NEAREST_INTERPOLATOR, NEAREST_SPREADERAST__BAD, AST__TUNULL, pointer| Constructor and Description |
|---|
SwitchMap(Mapping fsmap,
Mapping ismap,
Mapping[] routemaps)
Creates a SwitchMap.
|
decompose, getInvert, getNin, getNout, getReport, getTranForward, getTranInverse, invert, linearApprox, mapBox, mapSplit, rate, rebin, rebinD, rebinF, rebinI, resample, resampleB, resampleD, resampleF, resampleI, resampleL, resampleS, setInvert, setReport, simplify, tran1, tran2, tranGrid, tranN, tranPannul, clear, copy, delete, equals, finalize, getAstConstantI, getB, getC, getD, getF, getI, getID, getIdent, getL, getNobject, getObjSize, getRefCount, hashCode, isThreaded, reportVersions, sameObject, set, setB, setC, setD, setF, setI, setID, setIdent, setL, show, test, tunepublic SwitchMap(Mapping fsmap, Mapping ismap, Mapping[] routemaps)
fsmap - Pointer to the forward selector Mapping. This must have a
defined forward transformation, but need not have a defined
inverse transformation. It must have one output, and the number of
inputs must match the number of inputs of each of the supplied
route Mappings.
NULL
may be supplied, in which case the SwitchMap will have an undefined
forward Mapping.ismap - Pointer to the inverse selector Mapping. This must have a
defined inverse transformation, but need not have a defined
forward transformation. It must have one input, and the number of
outputs must match the number of outputs of each of the supplied
route Mappings.
NULL
may be supplied, in which case the SwitchMap will have an undefined
inverse Mapping.routemaps - An array of pointers to the route Mappings. All the supplied
route Mappings must have common values for the Nin and Nout
attributes, and these values define the number of inputs and
outputs of the SwitchMap.AstException - if an error occurred in the AST libraryCopyright © 2024 Central Laboratory of the Research Councils. All Rights Reserved.